Transducer

10 MB 200

http://www.powerxpro.in/wp-content/uploads/2018/06/10-MB-200.png

200 WATT POWER

51.5 mm (2 inch voice coil)

97 dB 1w @1m Sensitivity

65 Hz to 2.5 KHz Frequency Response

Ferrite Magnet Structure


Specification

Nominal Diameter Inch 10
Power Handling Capacity  w(AES) 200
Max Power watts 300
Nominal Impedance ohms 8
Sensitivity (1W/1M) dB 96
Frequency Range Hz 65 – 2.5Khz
Voice Coil Diameter mm/in 51.5/2

Thiele-Small Parameters

Fs Hz 68
Re Ohms 6
Qms 7.08
Qes 0.46
Qts 0.43
Vas L 28
Mms gr 32
Cms mm/N 0.17
BL Tm 13.5
Le mH 0.42
Xmax mm 4.5
nO % 1.9
Sd cm^2 346

  • Frequency Response & Impedance Magnitude Curves
http://www.powerxpro.in/wp-content/uploads/2018/06/10-MB-200-C.svg
  • Dimension Drawing
http://www.powerxpro.in/wp-content/uploads/2018/06/10-MB-200-D.svg

Dimension

Overall Diameter mm 262
Bolt Circle Diameter mm 244
Baffle Cut-out Diameter mm 230
Overall Depth mm 115
Net Weight Kg 3.5


▪Aes Power Is Measured with 6db Creat Factor Continuous Pink Noise in 2 Hours Duration
▪Max Power Is Defined as 3dB Higher than the Nominal Rating
▪Sensitivity Is Measured at One Meter at 2.83v and 8 Ohm Nominal Impedance
▪All Measurement of the Speakers Is Done After a Sufficient High Level of 20hz Sine Wave Test
▪Xmas Is Defined at Tahe BL Drops by 18% of the Original Figure