Transducer

8 MB 200

http://www.powerxpro.in/wp-content/uploads/2018/06/8-MB-200.png

200 WATT POWER

51.5 mm (2 inch voice coil)

95 dB 1w @1m Sensitivity

75 Hz to 3 KHz Frequency Response

Ferrite Magnet Structure

Specification

Nominal Diameter Inch 8
Power Handling Capacity w(AES) 200
Max Power Watts 300
Nominal Impedance Ohms 8
Sensitivity (1W/1M) dB 95
Frequency Range Hz 75 – 3Khz
Voice Coil Diameter mm/in 51.5/2

Thiele-Small Parameters

Fs Hz 68
Re Ohms 6
Qms 8.01
Qes 0.36
Qts 0.34
Vas L 16
Mms gr 26
Cms mm/N 0.18
BL Tm 13.6
Le mH 0.43
Xmax mm 3.5
nO % 1.5
Sd cm^2 213
  • Frequency Response & Impedance Magnitude Curves
http://www.powerxpro.in/wp-content/uploads/2018/06/8-MB-200-C.svg
  • Dimension Drawing
http://www.powerxpro.in/wp-content/uploads/2018/06/8-MB-200-D.svg

Dimension

Overall Diameter mm 210
Bolt Circle Diameter mm 196
Baffle Cut-out Diameter mm 185
Overall Depth mm 91
Net Weight Kg 3.3

▪Aes Power Is Measured with 6db Creat Factor Continuous Pink Noise in 2 Hours Duration
▪Max Power Is Defined as 3dB Higher than the Nominal Rating
▪Sensitivity Is Measured at One Meter at 2.83v and 8 Ohm Nominal Impedance
▪All Measurement of the Speakers Is Done After a Sufficient High Level of 20hz Sine Wave Test
▪Xmas Is Defined at Tahe BL Drops by 18% of the Original Figure